China quilting machine development

    Since 1986, China"s first since the advent of Computerized quilting machine, embroidery machine in the domestic market has developed rapidly, the peak of the market, the domestic production of embroidery machine business is up to more than three hundred, competition is unusually intense.

    In embroidery machine embroidery, cloth was previously cut into segments, but not to horsepower embroidery to frame as a unit, a frame length is generally 70 cm to 1 meters, embroidered by a manual disassembly, then dress up another section to the new embroidery.While the quilting embroidery machine is the biggest characteristic of the whole cloth roll operation without prior pieces, as long as the roll of cloth is placed into the special roller guide device, one head is fixed, in a quilting machine for embroidering machine without stopping, continuous operation until a cloth embroidered over to check.Feed, quilted, embroidery, discharging continuously, this is completed, hang a stuffed fabric or sheet, and do not need manual cloth loading and remove the cloth, simplifies the operation procedure, improve the production efficiency, reduce the labor intensity, but also improves the yield.

    In addition, the embroidery machine in artificial framing, remove frame, edge was part of fixed, while the fixed part cannot have embroidery, waste of raw materials.Quilting machine ends not pressed free cloth, can be directly embroidered into a corner, improves the utilization rate.

  Because the machine embroidery and quilting embroidery machine both in function and purpose are different, so the quilting embroidery machine can completely replace the embroidery machine.However, quilting machine, no doubt on the multi-needle quilting machine put forward a huge challenge.

News source: HengYeJiXie