Computerized quilting machine troubleshooting and repair (2)

Computer quilting machine at work breakdown are as follows:

A: run the quilting machine equipment for sewing frame and step motor;

Two: empty or empty back frame and a stepping motor;

Three: in the line frame when the stepping motor and jitter;

Four: when the actual size of quilting;

Five: when sewing frame and computer quilting machine stepper motor without movement or a direction without moving;

Computerized quilting machine troubleshooting and maintenance of the above methods are as follows:

The 1:F6 test 4 directions when the frame and step motor jitter or abnormal sound;

2: computerized quilting machine power by a pointer or digital multimeter;

3: synchronous belt is sliding;

4: fixed chain clip looseness, timely handle fastening;

5: to replace the corresponding drive (X or Y);

Check the 6: drive and computerized quilting machine stepper motor between the power supply line is open circuit or open circuit;

7: stepper motor aviation plug contact is good;

Note: * left for X direction; * next to the Y direction;

News source: HengYeJiXie