Computerized quilting machine basic maintenance and repair must be

Along with the production technology of intelligent development, quilting machine also continues to develop, from before the traditional quilting machine transformation to the present computer quilting machinery, can be said to be a leap of progress.Since computerized quilting machine in our industry wide application, so we computerized quilting machine basic maintenance and repair must be.

Reasonable working environment includes physical environment and electrical environment two respects, the former refers to the environmental temperature, humidity, dust, bud and vibration impact, the latter refers to static electricity, power line noise, radio frequency interference.If we neglect environmental factors, may cause the system to work.The environmental temperature and humidity computer on temperature and humidity requirements is not high, as long as the user feel comfortable environment, computer can adapt.Temperature: 0 ° -50 ° 30%-70% relative humidity temperature is too low, there may be some parts of the work is not normal, this is not a computer malfunction, the temperature is too high, the computer radiation is difficult due to the overheating, original and existing error action, relative humidity for different geographical position, too dry air may lead to accumulation of static electricity, damage to the integrated circuit, on human and machines were negative.Too supermarket air will make the computer"s internal chip caused by oxidation corrosion, resulting in contactor adverse or short circuit phenomenon, only pay attention to these details, to ensure we are in need of computer quilting machine work while you can work.

Ventilation: computer on ventilation of certain requirements, computer is placed where the best ventilation is good, smooth on the heat dissipation.Dust: keyboard, computer and other equipment are required to clean environment, little dust.The keyboard used to cover, plastic cover, available on the display can be used with a soft cloth to remove dirt,, remember not to work at a computer with a damp cloth to dust.In addition, also can open several case with a brush or vacuum cleaner clear internal dust, computer department, with the cover cloth to the host and the display cover.(Note: open items shall be provided by the manufacturer of single special formulate personnel operation, otherwise cancel after sale services)

Power line noise, radio frequency interference when the power supply is connected with the other heavier loads, such as motors, will cause the power supply voltage fluctuation or peak surge voltage, high peak voltage may damage the computer, because this should pay attention to and the computer directly connected to the grid to a heavy load, the host computer must be connected good.(such as voltage instability, subject to user to purchase real power over 3KW regulated power supply is used).Radio frequency interference and sometimes even mobile phone electromagnetic wave will be on the system interference, or make the system deadlock, change computer placement direction can make the problem solved, solve is the best way to be sure to use good shielding and grounding.Do not frequent on / off on / off instantaneously generated current ratio of stable operation of much larger, frequent switch leads to localized heating up too fast or system overload, thus reducing life, when the need for long-term leave the machine, in order to reduce the power consumption and the protection of the screen, we should adjust the small display contrast and brightness.

U dish use matters needing attention when U disk work don"t suddenly power off, save important files or data to the U disk, U disk, such as stochastic system backup plate must be affixed to write protection label, to prevent virus infection and deleted the coverage of U disk file, press U disk, also do not use hand touch U plate insert foot exposed part.All U disk must be labelled, indicating the disk file save file name, should first write label, and then paste it into the U disk.The use of U disk shall be put back into the disc protecting bag, boxes of files, to prevent dust from entering the U disk.(not to let children or those who do not understand touch, play etc.).

More about computer quilting, mattress machinery, please pay attention to this website information center.

News source: HengYeJiXie