Computerized quilting machine control system

Computerized quilting machine control system

Pattern name: 008.DST total needle number: 6888 current pin number 0 starting needle sewing speed F U disk.

The F1 F2 F3 computer pattern pattern pattern pattern image scaling S save F4 sewing F5 test

F6 returns the needle point

F7 into thread F8 thread breakage detection (N) F9 adjustable needle spacing F10 suspension

↑↓ transmission 1200

→← empty go G multiple needle from 6mm left academia in 9.9 dimensions: 170X200

Computerized quilting machine Computer air motor operating instructions:

1 boot: first open the computer part, after following motor part.2: first part following motor shutdown, shut the computer part.3 boot time note: (1) to check whether the normal voltage, average voltage was 220V ± 5%.(2) the boot after the display, such as brand advertising, press the Enter key, namely graph into a state.4 graphics options: first press the F1 key, and then press - ↑↓ four keys, the graph satisfy your request, then press the Enter key to.5 needle distance setting: press the F9 key, and then press - ↑↓ four keys, general needle distance is 4mm can be determined, press the enter key.

Computer quilting machine standard operation system and method

1 select U intraday pattern F keys for U disk pattern selection keys, operation method is: ① the U disk into the USB interface.② press F, picture operation, according to the operation cue selection pattern.Such as exit selection press the ESC key.2 choice of pattern in the computer F1 key to the computer pattern selection keys, operation pattern select memory directly presses the F1 key, automatic operation tips.According to the F1 preview pattern, such as the exit for the ESC key.3 figure scale press F2 scaler tips: X direction is wide, Y direction for long.Using ↑↓ the key to an increase of 1 cm and 1 cm if pattern to reduce, increase of 10 cm press ←, press for reducing 10 cm.Such as exit zoom function please press ESC.

News source: HengYeJiXie